RC Cars & Drone Parts

Free 3D print files

Files are free from their creators. We charge for the printing.

Pick from our inventory — bodies, mounts, frames, guards, and upgrades for RC cars and drones: Traxxas, Arrma, Losi, DJI, and FPV quads. Download the model you like, then send us the file and we’ll give you an exact quote. If it broke, we can probably print it. Don’t see what you need? Tell us what you’re looking for — we’ll research it and track it down for you.

Printing is $0.25/g PLA ($0.30/g silk), $15 minimum — the quote tool gives you the exact price. The designer is credited on each listing, and we encourage you to support the creators directly (memberships, tips, follows).

RC Cars — Bodies, Mounts & Upgrades

Bodies, mounts, wings, and upgrades for Traxxas, Arrma, Losi, and more.

Traxxas Slash Clipless Body Latch Mount Mount Traxxas Slash Clipless Body Latch Mount

Fits: Traxxas Slash 4x4, rear clipless body mount (replaces Traxxas part TRA6967) — Replacement clip for the rear clipless body mount when the stock clip breaks; print in PETG, 4–6 walls.

by makewithjake · Printables

Lap Monitor Transponder and Battery Holder Holder Lap Monitor Transponder and Battery Holder

Fits: Traxxas Slash 2WD, bolts around the front body mount posts — Holder for a small LiPo battery and a Lap Monitor race transponder, with the sensor poking through a hole in the hood.

by Nick S · Printables

Custom Front and Rear Wing for Traxxas 2WD Models (Rustler, Stampede, Bandit, Slash) Mount Custom Front and Rear Wing for Traxxas 2WD Models (Rustler, Stampede, Bandit, Slash)

Fits: Traxxas 2WD models only (NOT 4x4) — Bolt-on front and rear wings for downforce and speed runs; front wing mounts where the stock bumper goes, rear wing mounts where the wheelie bar goes.

by kbedrich · Printables

Traxxas Rustler 4x4 Hobbywing Max10 Mount Plate Mount Traxxas Rustler 4x4 Hobbywing Max10 Mount Plate

Fits: Traxxas Rustler 4x4 — Flat mount plate that bolts a Hobbywing Max10 speed controller to the stock holes in the Rustler chassis.

by 3D_Goblin · Printables

Arrma 4S V2 Shock Rod End (Kraton/Outcast) Shock part Arrma 4S V2 Shock Rod End (Kraton/Outcast)

Fits: Arrma 4S V2 Kraton / Outcast (replaces part ARA330672) — Replacement shock rod end; designer prints it in TPU95 or PC Blend and is still testing which holds up best.

by pandaym · Printables

Arrma 7.5x8mm 6S Shock Bushing Bushing Arrma 7.5x8mm 6S Shock Bushing

Fits: Arrma 3S vehicles running 6S shocks — Small bushing that lets 6S shocks fit on a 3S truck; print in the softest TPU you can, 6 walls.

by AfterEight · Printables

Arrma Infraction, Limitless and Felony GNSS Mount Relocator Mount Arrma Infraction, Limitless and Felony GNSS Mount Relocator

Fits: Arrma Infraction / Limitless / Felony (speed-run cars) — Relocates the SkyRC GNSS speed-meter mount to between the rear diffuser mounts to keep the weight low for speed runs.

by Deeps · Printables

Arrma Granite/BigRock/Typhon 3S Wing Spacer Mount Arrma Granite/BigRock/Typhon 3S Wing Spacer

Fits: Arrma Granite / Big Rock / Typhon 3S — Spacer that raises the wing mount so a Typhon 6S or Kraton wing clears the body; 10 mm and 16 mm versions, print in TPU.

by Dad's Friendly Robot Co · Printables

Arrma Granite 3S BLX v2 TPU Wing Mount Mount Arrma Granite 3S BLX v2 TPU Wing Mount

Fits: Arrma Granite 3S BLX v2 (also fits Big Rock 3S) — Flexible TPU wing mount, a remix of the stock-style mount with tougher supports and nut pockets; needs 3x M3 screws and locknuts.

by caracalrc · Thingiverse

Mount Rear Brace / Wing Mount for Arrma Big Rock 223S

Fits: Arrma Big Rock 223S — Rear brace that ties the roll bar to the rear body mount to stop the body flexing and cracking on roof landings, and doubles as a rear wing mount; 5 mm or 8 mm versions, 100% infill.

Cults3D

Traxxas TRX-4 Bumper Mount Delete Mount Traxxas TRX-4 Bumper Mount Delete

Fits: Traxxas TRX-4 crawler — Clean delete plate that removes the stock bumper mount for a tucked-in look; designer printed it in 95A TPU.

by CommaLlama · Printables

Front Bumper, Traxxas TRX4, Chevy K-10 Mount Front Bumper, Traxxas TRX4, Chevy K-10

Fits: Traxxas TRX-4 with the Chevy K-10 body (may fit other TRX-4 bodies) — Front bumper with a winch mount that bolts to the stock bumper holes; includes a taller reinforced version and a version without the logo.

by nexen · Printables

Armadillo Off-Road Truck 1/10 Body for SCX10 III Mount Armadillo Off-Road Truck 1/10 Body for SCX10 III

Fits: Axial SCX10 III Base Camp builder's kit chassis (313 mm wheelbase; may fit other 313 mm chassis with modified mounts) — Full hard truck body with working doors on magnets, fold-down bed sides, roof rack, and battery hatch in the bed floor; prints on a 180×180 mm bed in sections, with a step-by-step assembly manual.

by polymech3D · Printables

Crawler Cat 1 "Mammoth" 1/10 RC Body Crawler Crawler Cat 1 "Mammoth" 1/10 RC Body

Fits: TRX4 / TRX6 and SCX10 III (stretched/modified) chassis; 4x4 or 6x6 — Big scale truck cab with opening doors, foldable mirrors, working roof latch, detailed dashboard, and side tire carrier; cab-only listing (expedition cab sold separately).

by Ian Jim · MyMiniFactory

Mercedes UNIMOG U5023 Cabin / Body (RC Car / RC Truck) 1/10 scale Multicolor Mercedes UNIMOG U5023 Cabin / Body (RC Car / RC Truck) 1/10 scale

Fits: Designer's own Unimog RC chassis (mounting brackets included) — Detailed 1/10 Unimog cab in 3 parts with opening doors and hood, seats, dashboard, mirrors, and snorkel; prints in 3 colors.

by Prism08 · Printables

Losi Mini-B +2mm Wheels Wheels Losi Mini-B +2mm Wheels

Fits: Losi Mini-B — Wheels with a 2 mm offset that make the Mini-B 4 mm wider overall, built to push it to the 184 mm limit for Mini Off-road Nationals racing.

by nick.cnc · Printables

Team Losi Mini T 2.0 Hex Adapter 8-12 mm No supports Team Losi Mini T 2.0 Hex Adapter 8-12 mm

Fits: Losi Mini-T 2.0 — Adapter that converts the stock 8 mm wheel hex to 12 mm so bigger aftermarket wheels fit; print flat, no supports.

by tylermor · Printables

Low Center of Gravity Conversion for Losi Micro-B Mount Low Center of Gravity Conversion for Losi Micro-B

Fits: Losi Micro-B — Chassis conversion kit (top/bottom case, side rails, battery strap, servo mount) that lowers the layout for better handling and lets retro and modern bodies fit without moving the electronics.

by officepizzaparty · Printables

OpenRC F1 Car - 1:10 RC Car RC car OpenRC F1 Car - 1:10 RC Car

Fits: Fully 3D-printed 1:10 Formula 1 car (own chassis, needs motors/electronics/bearings per the build guide) — The classic open-source printable F1 car: print everything in PLA except the tires (flexible filament), with a full build guide and parts list.

by barspin · Thingiverse

Mini RC Track System Modular Mini RC Track System

Fits: Mini-Z, Losi Micro-B, and other small-scale RC cars — Modular 1-foot track sections (straights, corners, connectors) in PLA and TPU to build a mini RC race track, including a timing-tower setup.

MakerWorld

Drones — Frames, Mounts, Guards & Accessories

Frames, mounts, guards, and accessories for FPV quads and DJI drones.

Leopard FPV Drone Modular Leopard FPV Drone

Fits: 5-inch FPV quad (needs 22xx motors, flight controller/ESC stack, FPV system, battery) — Fully printable modular 5-inch FPV quad frame: plates, arms, camera guards, antenna block, TPU bumpers and GPS mount; designer recommends ABS/ASA, nylon or PC for the frame and TPU for the guards.

by ProgrammaDan · Printables

The WU TANK: Micro Freestyle FPV Frame (5 and 6 inch) Frame The WU TANK: Micro Freestyle FPV Frame (5 and 6 inch)

Fits: 5.25-inch and 6-inch freestyle FPV builds (DJI Vista/O3, most stacks) — Ultralight freestyle FPV frame (5-inch is 65 g) in WideX and DeadCat arm layouts; carbon-cut arms with printed accessories, fits DJI Vista/O3 and most electronics.

by ledrone.club · Printables

WU TANK MAX2 (Sparrow Edition) - 5 & 6 inch freestyle frame Mount WU TANK MAX2 (Sparrow Edition) - 5 & 6 inch freestyle frame

Fits: 5- and 6-inch freestyle FPV builds (DJI O4 Pro/O3, Vista, Walksnail) — Freestyle FPV frame with universal camera plates, DJI O4 Pro/O3 and Walksnail support, and GoPro mounts included; arms are carbon-cut, accessories print in TPU.

by ledrone.club · Printables

Grasshopper5 5 inch Long Range FPV Frame Frame Grasshopper5 5 inch Long Range FPV Frame

Fits: 5-inch long-range FPV builds (Betaflight/ArduPilot/INAV, DJI O3 or analog) — 5-inch FPV frame with an adjustable tilt angle (20°/30°/45°) between the rotor plane and the body for better forward-flight efficiency; fits standard 20×20 and 30.5×30.5 stacks.

by Robofusion · MakerWorld

Dragonfly FPV Drone Modular Dragonfly FPV Drone

Fits: 5-inch FPV quad (needs 22xx motors, flight controller/ESC stack, FPV system, battery) — Fully printable modular 5-inch FPV quad, the lighter, sharper-looking brother of the Leopard; ABS-GF frame with TPU guards, bumpers and GPS mount.

by ProgrammaDan · Printables

CineWhoop 5-Inch Frame – Replica of Lumenier QAV-PRO Whoop 5" Prop CineWhoop 5-Inch Frame – Replica of Lumenier QAV-PRO Whoop 5"

Fits: 5-inch cinewhoop builds (20×20 / 30.5×30.5 stacks) — 5-inch cinewhoop frame modeled on the Lumenier QAV-PRO Whoop 5 (not exact, new cage shape) with enclosed prop guards; DXF/STEP files for laser-cutting carbon or acrylic, STL optional.

by virk3D · Printables

Race Drone Modular Race Drone

Fits: 4-inch and 5-inch FPV race builds — Fully printable aerodynamic race quad frame in 4-inch and 5-inch versions (about 70 g of prints), modular frame and canopy with 14 mm and 19 mm FPV camera canopies.

by Y3D · Printables

World's Smallest DJI FPV Drone - NanoBee45 O4 v1.0 Multicolor World's Smallest DJI FPV Drone - NanoBee45 O4 v1.0

Fits: 45 mm micro FPV build (DJI O4 Lite, BetaFPV 3-in-1 flight controller, 0802 motors) — 45 mm micro FPV drone frame for the DJI O4 Lite, with a floating anti-jello canopy that holds the camera, video transmitter and battery in one; frame in PA6-CF, canopy in 95A TPU.

by Multiboard3D · Cults3D

65mm Whoop Frame / 40mm Props / 21g / Micro Quad Prop 65mm Whoop Frame / 40mm Props / 21g / Micro Quad

Fits: 65 mm micro quad (0803 motors, BetaFPV F4 flight controller, 40 mm props) — 65 mm micro quad frame for 40 mm props, 21 g all-up; print the frame in NylonX and the battery holder in TPU.

by Rygar1432 · Printables

BetaFPV Meteor65 Pro Frame Prop BetaFPV Meteor65 Pro Frame

Fits: BetaFPV Meteor65 Pro tiny whoop (up to 35 mm props, 26 mm flight-controller mount) — Replacement frame for the BetaFPV Meteor65 Pro tiny whoop (standard Pro edition, not the lighter Air frame); solid and partitioned versions included.

by Riley Entropy · Printables

BetaFPV Air Canopy for lower cam angles - For Air65 and Air75 Tinywhoops Canopy BetaFPV Air Canopy for lower cam angles - For Air65 and Air75 Tinywhoops

Fits: BetaFPV Air65 / Air75 tiny whoops — Canopy for BetaFPV Air tiny whoops with a longer tail for lower camera angles and better antenna support; designer printed it in nylon PA12 (TPU also works).

by MakerMeik · Printables

BetaFPV cetus pro printable landing feet Press BetaFPV cetus pro printable landing feet

Fits: BetaFPV Cetus Pro tiny whoop — Tiny press-fit landing feet for the BetaFPV Cetus Pro, about 4.5 mm extra ground clearance; scale 1–2% if the fit is tight.

by Voxel3D_NL · Printables

Modular Tinywhoop Stand for 65mm, 75mm and 85mm drones Modular Modular Tinywhoop Stand for 65mm, 75mm and 85mm drones

Fits: 65/75/85 mm tiny whoops (1S 300/550 mAh and 2S 550 mAh battery holders) — Modular display/storage stand for tiny whoops; the adapter slides into the whoop's battery holder, with holders for 1S 300 mAh, 1S 550 mAh and 2S 550 mAh batteries.

by Crytorious · Printables

The FPV Antenna Project: Universal FPV Drone U.Fl for O3/Vista/walksnail,etc +VTx Mount The FPV Antenna Project: Universal FPV Drone U.Fl for O3/Vista/walksnail,etc +VTx

Fits: 80+ FPV frames (TBS Source One, ImpulseRC Apex, Diatone Roma, iFlight Nazgul, and more) — Mix-and-match TPU antenna, GPS and video-transmitter mounts for FPV drones, covering 80+ frames and 50+ antennas (DJI O3/Vista, Walksnail, TBS Crossfire); the designer makes your exact setup on request.

by Tim O'Brien · Printables

FPV drone antenna mount Mount FPV drone antenna mount

Fits: Any FPV drone with standoffs; made for the TBS Crossfire Immortal T antenna — Foldable TPU antenna mount that slides onto the frame standoffs and folds flat for transport; print in TPU 95A.

MakerWorld

Diatone Roma F4 Gopro mount Mount Diatone Roma F4 Gopro mount

Fits: Diatone Roma F4 FPV drone (also Roma F3.5 / F5) — TPU GoPro mount for the Diatone Roma F4; normal and reinforced versions, print solid infill at high temperature for best layer grip.

by Frodo · Printables

MA GoPro-Style Finger Mount for Catalyst Machineworks BangGOD FPV Drone Prop MA GoPro-Style Finger Mount for Catalyst Machineworks BangGOD FPV Drone

Fits: Catalyst Machineworks BangGOD FPV frame — GoPro-style finger mount for the BangGOD frame that puts the camera right at the front for a prop-free view; print in TPU, 20% infill.

by Magic Aerials · Printables

DJI Avata Prop Guard Delete Prop DJI Avata Prop Guard Delete

Fits: Original DJI Avata — Delete kit that replaces the bulky stock prop guards on the original Avata to fix the "Avata tumble" and cut drag and weight.

by Adr1an · Printables

DJI Avata 2 Combi Guard Prop DJI Avata 2 Combi Guard

Fits: DJI Avata 2 — Revised prop guard for the Avata 2 with built-in camera protection; clips over the stock guard and still fits in the DJI shoulder bag; PETG recommended.

MakerWorld

DJI Landing pad Multicolor DJI Landing pad

Fits: DJI Mini 4 Pro (probably Mini 3 and similar-size Minis too) — Compact 230×230 mm landing pad for DJI Mini-series drones with a high-visibility graphic; print in PLA, PETG or ASA.

MakerWorld

Jelly Cargo Drone System for Dji Mini Pro 4/3/2 Drone Jelly Cargo Drone System for Dji Mini Pro 4/3/2

Fits: DJI Mini 4 Pro (tested); Mini 3 Pro / Mini 2 unconfirmed — Flexible TPU tentacle arms that turn a DJI Mini into a tiny cargo carrier — adds 4.85 g, carries up to 95 g; for experienced pilots only, not supported by DJI.

MakerWorld

DJI Mini 3-4-5 Pro Fly More Case Case DJI Mini 3-4-5 Pro Fly More Case

Fits: DJI Mini 3/4/5 Pro Fly More combo + DJI RC / RC 2 controller with sun hood — Rugged carry case for the Mini 3/4/5 Pro Fly More combo and controller, with separate spots for the ND-filter set and a folding landing pad.

MakerWorld

DJI Mini 4 pro landing gear Clip DJI Mini 4 pro landing gear

Fits: DJI Mini 4 Pro — Clip-on landing legs for the DJI Mini 4 Pro that raise it off grass and rough ground; two leg versions plus a cross brace, designer printed in PLA+.

by John2637 · Thingiverse

DJI Mini 4 Pro Shoes Shoes DJI Mini 4 Pro Shoes

Fits: DJI Mini 4 Pro — Tiny TPU feet protectors for the DJI Mini 4 Pro; 2 g per set.

by Sph3raLab · MakerWorld

DJI mini 4 pro stand Stand DJI mini 4 pro stand

Fits: DJI Mini 4 Pro — Display stand for the DJI Mini 4 Pro; 5.3-hour print, two PETG parts (21 g + 58 g).

by Scorch1262 · MakerWorld

DJI Neo Landing Gear/Feet v1.2 Landing gear DJI Neo Landing Gear/Feet v1.2

Fits: DJI Neo — Twist-on landing feet for the DJI Neo so it can take off from sand, pebbles or lawn instead of your hand; version 1.2.

by straightouttanozzles · MakerWorld

DJI Neo 2 Clip-On Landing Gear – 3 Pieces Clip DJI Neo 2 Clip-On Landing Gear – 3 Pieces

Fits: DJI Neo 2 — 3-piece snap-fit clip-on landing gear for the DJI Neo 2, no screws or glue; the side button stays reachable; prints on one plate in PLA.

MakerWorld

DJI Neo Bumper Clip DJI Neo Bumper

Fits: DJI Neo — Bumper for the DJI Neo that clips onto the frame (PETG's flex holds it on; TPU does not fit); print twice, one per side, plus a version with landing skids built in.

MakerWorld

Dji neo bumper guards Prop Dji neo bumper guards

Fits: DJI Neo — Bumper guards for the DJI Neo that sandwich between the prop duct and the top guard; a remix of the Avata 2 bumper design.

MakerWorld

DJI Mavic Mini 3, Mini 3 PRO, Mini 4 PRO Landing Skids Phantomizer Landing gear DJI Mavic Mini 3, Mini 3 PRO, Mini 4 PRO Landing Skids Phantomizer

Fits: DJI Mavic Mini 3 / Mini 3 Pro / Mini 4 Pro — Landing skids that give the Mini 3/4 Pro taller "Phantom-style" legs; 7 files (STL + 3MF).

by 3dthinks · Cults3D

Can't find your part?

Don't see your car or drone part? Tell us the model and what broke — we'll research it, find the file, and print it for you. Send a photo or your own STL and we'll take it from there. Functional parts are printed in PETG, TPU, or nylon — not PLA — so they hold up on hard landings.