Business, Conventions & Office
Free 3D print files
Files are free from their creators. We charge for the printing.
Pick from our inventory — desk organizers, office gadgets, convention swag and booth gear for companies. Download the model you like, then send us the file and we'll give you an exact quote. Ordering for a whole team or a convention? Ask about bulk pricing — 25+ units 10% off, 50+ units 15% off. Don't see what you need? Tell us what you're looking for — we'll research it and track it down for you.
Printing is $0.25/g PLA ($0.30/g silk), $15 minimum — the quote tool gives you the exact price. The designer is credited on each listing, and we encourage you to support the creators directly (memberships, tips, follows).
Desk Organizers
Pen holders, trays and desktop storage that keep a workspace tidy.
A compact one-piece desk organizer for the items you actually reach for: pens, markers, scissors, a ruler slot, and a small front compartment; the designer's own unit has been in daily use for 2+ years.
by HIDAKA · Printables
A one-piece modular organizer with a pen/pencil compartment and a sticky-note slot, aimed at students but fine for any desk.
by Gt · Printables
A simple cylindrical organizer with a geometric cube pattern; works as a pen holder, desk organizer, or small plant pot cover (95 mm inside diameter, 115 mm tall).
by Tallat Mehmood · Printables
A minimalist pen holder shaped like a pan flute, with five angled holes for pens or markers and a stepped top edge.
by SLIMPRINT · Printables
A clean all-in-one desk organizer: angled phone stand slot, sticky-note holder, pen/pencil cups, and a large cup for scissors or highlighters.
by Donavan nel · Printables
A tilting pen grid on side-locking knobs so you can dial in the exact angle, with a USB cable slot; grid, base, and knobs print as separate parts.
by Tallat Mehmood · Printables
A detailed sculpted skull desk tidy for pens, pencils, and craft tools; a characterful desk piece for a workshop or gaming setup.
by Darren J Young · Printables
A stone-tower castle pen holder guarded by a detailed dragon; a decorative pen/brush holder and desk display piece.
by Rip282 · Printables
A cute minimalist pen holder in a cozy sweater-man shape with a wide top opening for pens, pencils, markers, or small desk tools.
by Botany Chic · Printables
A small honeycomb-pattern pen/marker holder with a flat back for double-stick tape or hook-and-loop, so it sticks to a whiteboard, wall, or desk edge.
by Gambit3le · Printables
Business Cards & Desk Name Plates
Card holders, dispensers and customizable name plates for desks and reception counters.
A business card holder shaped like a Prusa Mini 3D printer, holding ~7 cards in 90x50 or 85x55 sizes; a talking point for a print-shop counter.
by Ag.3 · Printables
A stylish business card holder for about 60 cards, shaped like a lava-spewing volcano, for 85x55 mm cards.
by Windkanter · Printables
A minimal, compact sliding card holder for standard 3.5"x2" (90x51 mm) business cards, about 10 cards; rounded and squared corner versions included.
by alexberkowitz · Printables
A spring-loaded card dispenser using rubber bands, for 76.2x50.8 mm cards; cards pop up ready to hand out.
by Horacio · Printables
A novelty business card holder built like a scissor lift, with a platform that raises the cards; customize with your own label or printed text.
by C3D · Printables
The original flat-pack, print-in-place pop-up card holder: credit-card size, 0.6 mm thick, holds a stack of cards up to 15 mm thick; a ~20-minute PETG print.
by XNDR · Printables
A business card holder that is a modification of the designer's Desktop Nameplate, so the card holder and nameplate match as a desk set; Google-font text options included.
by Startrekfan2 · Printables
A desktop nameplate with 1250 first names included as ready-to-print files, plus an OpenSCAD file to customize it to any name or two lines of text; prints in 2 colors with a filament change.
by Makkuro · Printables
A simple print-in-place desk nameplate system: holders plus plates with job titles (and teacher versions K–6), a tri-holder for 3 plates, and a blank plate to personalize.
by Topher · Printables
A modular desk name tag: print the letters you want and customize it to make it your own; PET, 2 print files.
by arcanelayers · Printables
Phone, Tablet & Laptop Stands
Stands and risers that put screens at a comfortable viewing angle.
No supports
SlimDock – Universal Phone Stand (No Supports)
A sleek, ultra-minimalist single-piece phone stand for portrait and landscape viewing, video calls, and desk charging; zero supports, under 30 minutes to print.
by not shown on page fetch · MakerWorld
Stand
DOKY Travel Phone Stand - Elevated Desk Dock
A compact, elevated travel phone dock for hotel rooms, Airbnbs, and temporary desks; freestanding, no assembly, landscape viewing for video calls.
by Pr.BELAMINE MakerLab · MakerWorld
Modular
Gravity Phone Stand | Auto Clamping Holder
A mechanical phone stand that uses the phone's own weight to auto-grip it with side clamps; bold industrial look, part of a modular desk series.
by not shown on page fetch · MakerWorld
Stand
2-in-1 Floating Phone Stand & Desk Organizer
A phone stand with "floating" tabs plus compartments for pens, SD cards, and office essentials, with a hidden cable channel underneath.
by not shown on page fetch · MakerWorld
Multicolor
Phone & Tablet Stand | TriDock Pen Holder
A phone and tablet stand with dual rear pen holders (sized for thick branded pens) and a charging cable opening; works with thick phone cases.
by not shown on page fetch · MakerWorld
No supports
Adventure Phone Stand
A tilting phone stand with an adjustable-tilt mechanism and a compass-rose face, matching the designer's EDC tray series; no supports, works with wired charging.
by not shown on page fetch · MakerWorld
A fully parametric folding laptop stand (Shapr3D): set your display size and the model updates; adjustable height via angled notches, folds flat for storage.
by Shapr3D · Printables
A fully 3D-printable laptop stand for 13–14" laptops (15" feasible), tilting up to 60 degrees; STEP files included for custom sizing.
by Moosybuilds · Printables
A vertical laptop dock that stands a closed laptop on its edge to save desk space; adjustable for 10–30 mm thick devices.
by Nick · Printables
A multi-purpose tilt-adjustable stand (from −63° to +63° in 1° steps) for laptops up to 16", tablets, books, and documents; document extenders included.
by NLarson · Printables
Cable Management & Office Gadgets
Cable clips, tape dispensers, headset stands, monitor risers and whiteboard gear.
Slip-on cable clips that slide over desk edges up to 25 mm thick and route cables through a clean pass-through hole; 3 sizes (7/10/13 mm cable holes).
by Tanush Reddy · Printables
Minimalist rounded cable holders that keep charging and desk cables in place and stop them sliding off the desk; no supports.
by 3DTimon · Printables
A thick, boxy locking cable clip that won't pop open on its own; 16 sizes (1–16 cable holes) and 4 mounting options (tape, screw, etc.).
by neoyarus · Printables
A snap-on cable clip organizer for 2–4 mm wires; squeeze to open, reusable, no adhesive, screws, or mounts.
by Mateusz Tokarz · Printables
A sleek, flowing headphone stand with a sturdy base and smooth curved profile that supports the headband evenly; no supports, minimal filament.
by Roberto Gallocchio · Printables
A small, cute handheld/desk tape dispenser with spring-loaded roller knobs; available with cutting teeth or a 1 mm slot for metal teeth.
by MerganMcFergan · Printables
A desk-clamping tape dispenser (it clamps to the table so it stays put) with a tape shelf and a metal blade insert; the designer's long-tested claim is that this one actually works.
by designStryc · Printables
A parametric monitor riser that lifts a desk monitor 128 mm to align with a wall-mounted TV; fits a Prusa MK3S bed.
by layer.works · Printables
A monitor riser that raises the monitor 130 mm, built from sets of drawers (2–3 sets across the width) for pens, USB drives, and desk clutter.
by DylanMcC · Printables
A simple screw-to-wall holder for 4 whiteboard markers (optimized for 18 mm diameter Staedtler markers), printed upright with a built-in support element.
by 100prznt · Printables
Convention & Booth Display
Badge holders, lanyard clips, keychains, sign holders and brochure stands for trade shows and booths.
A stand/mount system that holds a display sign vertically (like an easel, but the sign rests vertical or slightly forward-leaning); built as a remix of a headphone stand for a real business sign.
by RyanR · Printables
A Gridfinity-compatible brochure stand that holds A5 or half-letter paper, with modular hanging tray inserts for a booth counter or reception desk.
by SeventhSeeker · Printables
A flat-printed sign that bends along a recessed "v" to form a freestanding tent sign — the template format for any booth table tent (swap in the customer's own text).
by Sandy Wrestler · Printables
An ultra-slim, support-free holder for one CR80/ID-1 card (bank/ID/NFC), with a lanyard/clip slot and three mounting holes; OpenSCAD source for remixing.
by Andrew · Printables
A "forever" badge holder with no opening: the card is paused into the print mid-way, so it can never fall out; 6 versions (hook/ring/flat clip x vertical/horizontal), plus a 2025 version with a measuring tape and pen holder.
by vsaggiomo · Printables
A two-piece snap-together badge holder that also holds a Steelcase-style desk key in the back, with a vinyl snap loop for a lanyard or retractable clip; portrait and landscape versions.
by az · Printables
A snap clip for a standard 20 mm lanyard strap and ID badge; prints clean with no supports, in 1-card and 3-card-wide versions.
by MatthewGTaylor · Printables
A two-part belt mount for a standard retractable badge reel: an inner loop for a 40 mm belt and an outer part that screws on and holds the reel.
by Altair · Printables
A keychain template for the customer's own logo with a 27 mm NFC tag embedded mid-print; tap it to share a website, WiFi login, or digital business card.
by Discipulus Technologies · Printables
A parametric keychain fob for the customer's own logo with an 18 mm RFID tag embedded mid-print (two pauses: insert tag + key ring, then color change); Fusion 360 parameters adapt it to any tag/key-ring size.
by whoppingpochard · Printables
Can't find your office or convention piece?
Text us at (402) 413-5332 or get an instant quote at lincolnprintlab.com — send us the model file or just describe what you need and we'll track it down, customize it with your logo or name, and quote it for your whole team.