Car Parts

Free 3D print files

Files are free from their creators. We charge for the printing.

Old-school American cars break the little plastic bits first — the clips, bezels, vents, and mounts nobody makes anymore. We print them. Adapters, mounts, brackets, emblems, gauge pods, cup holders, speaker adapters, and wire looms — if it’s plastic and it fits your car, we can probably make it. Don’t see your car on this page? Tell us what you drive and what you need — we’ll research it and track the part down for you.

Best bets to start with: the dash bezel for GloShift gauges, the 6×9 rear-deck speaker adapter, the spark plug wire loom kit, and the El Camino bed molding clips. Most small parts start at our $15 minimum — get an instant quote with your file, or text us for a price. Bring your own model file, or just tell us what broke and we’ll design it.

Printing is $0.25/g PLA ($0.30/g silk), $15 minimum — the quote tool gives you the exact price. The designer is credited on each listing, and we encourage you to support the creators directly (memberships, tips, follows).

Classic GM 1978–1988

Monte Carlo, Cutlass Supreme, Regal, Grand Prix, El Camino, Malibu — the 80s GM cars. These are the parts we print most for this crowd.

Dash bezel for GloShift gauges Gauge pod Dash bezel for GloShift gauges

Dash bezel and gauge cluster insert made to fit GloShift gauges and Amazon accessory gauges.

Fits: 1978–88 Monte Carlo, Cutlass Supreme, El Camino, and more 80s GM cars

Big part — printed on our large-format printer. Finished bezels like this sell for $150–$228.

Rear-deck 6×9 speaker adapter Adapter Rear-deck 6×9 speaker adapter

Adapter that fits modern 6×9 speakers into the factory 4×10 rear-deck spots. No cutting, no drilling.

Fits: 1986 Monte Carlo SS; most 1978–88 GM cars

Print in CF PETG at 100% infill, per the designer.

El Camino bed molding & tailgate trim clip Clip El Camino bed molding & tailgate trim clip

Replacement clips that hold the upper bed and tailgate trim in place. Reuses the original metal spring clip.

Fits: 1978–87 Chevrolet El Camino

Also fits 1978–87 GMC Caballero. Repro part # OPR 08-3720-I. Print in ASA at 100% infill.

Indicator light gasket Gasket Indicator light gasket

Replacement gasket for the “Choke”, “Service Engine Soon”, and “Fasten Seat Belt” indicator lights.

Fits: 1978–88 GM cars

Print in ABS, not PLA.

Bucket seat / console foldable cup holder Holder Bucket seat / console foldable cup holder

Foldable cup holder that mounts inside the center console with Velcro. Fits a soda can or a small coffee.

Fits: 1978–87 GM cars with bucket seats

Stereo lower mount patches Mount Stereo lower mount patches

Glue-on patches that repair blown-out lower stereo mount screw tabs.

Fits: 1978–87 GM cars

Print in ABS, not PLA.

Monte Carlo emblem Emblem Monte Carlo emblem

Monte Carlo emblem and badge — a printable replacement or display piece. We already printed this one.

Fits: Chevrolet Monte Carlo

Display only — trademarked emblem, no price.

1984 Monte Carlo SS wall art Wall art 1984 Monte Carlo SS wall art

Flat 2D silhouette wall art of the ’84 Monte Carlo SS. Booth and garage display piece.

Fits: Display — any wall

Search “Monte Carlo SS” inside the collection.

MakerWorld

Childs Play emblem — 1980 El Camino Emblem Childs Play emblem — 1980 El Camino

Custom replacement for the Chevrolet badge, spun on the designer’s surname “Childs”.

Fits: 1980 El Camino (designer unsure of other years)

Classic Chevy

Chevelle, Camaro, Corvette, C10, and the older El Caminos.

’73–’77 El Camino upper bed molding clip Clip ’73–’77 El Camino upper bed molding clip

Clips that fit the factory nubs over the rear window and hold the chrome trim. About 1 g of filament each, 5 needed per car.

Fits: 1973–77 Chevrolet El Camino

Repro part # OPR 08-3710. Print in ABS with a 5 mm brim.

’68 Chevelle ashtray cup holder Holder ’68 Chevelle ashtray cup holder

Cup holder inlay that drops into the original ashtray. Optional magnets, plus a coin slot.

Fits: 1968 Chevrolet Chevelle

MakerWorld

’75/’76 Chevelle Laguna S-3 license plate mount Mount ’75/’76 Chevelle Laguna S-3 license plate mount

Front license plate mount that uses the pre-existing holes at the bottom center.

Fits: 1975–76 Chevelle Laguna S-3

Print in PETG, ASA, or ABS.

8mm spark plug wire loom kit Wire loom 8mm spark plug wire loom kit

Wire loom kit that holds 8 mm spark plug wires on the valve cover.

Fits: 1960s–70s Chevrolet big blocks (designed for a ’70s Chevelle)

Print in ASA, PETG, or nylon — engine-bay heat. Not PLA.

2010 Camaro mirror to ’68–’73 A-body adapter Mount 2010 Camaro mirror to ’68–’73 A-body adapter

Mirror adapters, spacers, and shims to mount 2010 Camaro side mirrors on A-body doors.

Fits: 1968–73 Chevelle, El Camino, Sprint, and other GM A-body cars

Edelbrock 1806/1906 duct intake Intake Edelbrock 1806/1906 duct intake

Printable air-intake duct with a filter system for an Edelbrock 1806/1906 carb.

Fits: 1976 Chevrolet Monte Carlo

Print in ASA — engine-bay heat. Filter is a hand-cut sheet over a 5 mm plate.

Speaker box (kick-panel) Box Speaker box (kick-panel)

Speaker box that replaces the kick-panel air vent.

Fits: Chevelle and Pontiac GTO

Printed in sections on our large-format printer.

Classic Ford

Mustang, F-150, and the old Ford trucks.

Mount Foxbody Mustang Holley 12.3" Pro Dash mount

Dash mount for a Holley 12.3-inch Pro Dash, made for the Foxbody instrument cluster opening.

Fits: 1987–93 Ford Mustang

STL file available from the designer — ask us and we’ll get it.

Gauge pod Ford trucks 1967–1979 parts catalog

A print farm’s 150+ part catalog for classic Ford trucks — triple-gauge pillar pods, tail light buckets, glove box inserts, and more.

Fits: 1967–79 Ford trucks

Shop catalog — we can design and print similar parts for your truck.

Visit the catalog →
Your Ford part not listed?

Tell us the year, model, and what broke. We’ll design it and print it.

Fits: Any Ford

Chrysler, Dodge & Plymouth

Mopar — Charger, Challenger, Barracuda, Ram, and the old Dodge trucks.

Dodge Charger cup holder Holder Dodge Charger cup holder

Cup holder for the Charger console.

Fits: 2019 Dodge Charger Pursuit

1975 Dodge trim clip Clip 1975 Dodge trim clip

Replacement clip for the wide trim on 70s Dodge trucks.

Fits: 1970s Dodge trucks

Vent Mopar dash vents — 1970–74 Challenger & Barracuda

Reproduction dash vents for the E-body cars.

Fits: 1970–74 Dodge Challenger and Plymouth Barracuda

Shop part — we can design and print a version for your car.

See the part →
1st-gen Dodge Ram double-DIN radio kit Mount 1st-gen Dodge Ram double-DIN radio kit

Double-DIN radio bezel with HVAC relocation mount.

Fits: 1st-gen Dodge Ram

Shop part — we can print a version for your truck.

See the part →
2-inch (52mm) single gauge pod Gauge pod 2" (52mm) single gauge pod

Single 52 mm gauge pod — the base model for custom gauge setups.

Fits: Universal; shown on a 1987 Dodge Ramcharger

Trucks

Chevy and GMC square-body, Silverado, and Sierra — the work trucks.

Mount ’81 square-body gauge pod adapter

Gauge pod adapter for the factory dash bezel. Gauges mount from behind and come out for wiring.

Fits: 1981 Chevrolet square-body truck

Community design — ask us and we’ll print a version.

See the part →
Gauge pod GMT800 center-console gauge pod insert

Center-console gauge pod insert, angled at the driver, for 52 mm gauges.

Fits: 1999–2006 Chevrolet Silverado / GMC Sierra

Community design — custom work available.

See the part →
Clip ’99–’06 Chevy/GMC dash-pocket adapter plate

Dash-pocket adapter plate for a 2-1/16" gauge or module. Clips in with the factory clips.

Fits: 1999–2006 Chevrolet/GMC trucks

Free STL promised by the creator on MakerWorld.

See the part →
Holder Square-body C10 ashtray cup holder

Dual cup holder that drops into the ashtray slot.

Fits: Chevrolet C10 square-body trucks

Community/seller part — we can print a version.

See the part →

Car Accessories

Cup holders, phone mounts, trash bins, and organizers for the inside of your car — the everyday stuff that makes driving easier. In-car parts live in summer heat, so we print these in PETG or ASA, not PLA, so they don’t warp on a hot day. Don’t see what you need? Tell us — we’ll research it and track it down for you.

Cup Holder Trashcan Holder Cup Holder Trashcan

Cup-holder trash can with a self-closing pivot lid and counterweight so it doesn't rattle; keeps receipts and wrappers out of sight.

Fits: Standard car cup holders

by 3DPrototech · MakerWorld

Car Glasses Clip Clip Car Glasses Clip

Simple sun-visor clip that holds sunglasses/glasses within reach; print in PETG or ASA for heat resistance.

Fits: Any car sun visor

by UniversalMaker · MakerWorld

Gimbal Cup Holder Holder Gimbal Cup Holder

Self-leveling gimbal cup holder for 12oz/16oz cans that stays level on turns; fits standard cup holders, also works for kayak/ATV/stroller. Print in PETG.

Fits: Standard car cup holders (also kayak, ATV, stroller)

by nitroturd7856 · MakerWorld

Car Cup Holder Expander Holder Car Cup Holder Expander

Expander insert that lets oversized bottles and tumblers fit a standard car cup holder; includes a phone slit and a customizable version.

Fits: Standard car cup holders

MakerWorld

Gravity Grip Car Phone Holder - Modular Modular Gravity Grip Car Phone Holder - Modular

Air-vent phone holder that uses the phone's own weight to grip it — no springs or metal parts; 20mm ball joint makes it modular, cup-holder base also available.

Fits: Most car air vents

MakerWorld

Universal Cup Holder Holder Universal Cup Holder

Clamp-on cup holder for strollers, wheelchairs, bikes, golf carts and more; fits bottles up to 85mm, with optional phone-holder and bag-hook attachments.

Fits: Strollers, wheelchairs, bikes, golf carts — clamps on

by RED_eleven · MakerWorld

Push Lid Car Door Pocket Trash Bin No supports Push Lid Car Door Pocket Trash Bin

Small trash bin with a push lid that clips onto the car door side pocket for receipts and wrappers; one-hand toss, no supports needed.

Fits: Car door side pockets

by AzizMaker · MakerWorld

Car Accessories #03 - Air Freshener Set Air freshener Car Accessories #03 - Air Freshener Set

Hanging air freshener that holds a standard 58mm cotton pad soaked in scented oil; includes a clean generic version plus brand-inspired versions (use the generic one for selling).

Fits: Any car — hangs from the mirror

MakerWorld

Car Vent Cup Holder v2 Holder Car Vent Cup Holder v2

Cup/bottle holder that hooks onto a car air vent; improved v2 with tree supports, 6 walls, lower height and shorter hangers.

Fits: Most car air vents

MakerWorld

Tesla Model 3/Y Organizer Organizer Tesla Model 3/Y Organizer

Center-console organizer for Tesla Model 3/Y with a charger-adapter slot, pill-bottle compartments, a hand-sanitizer pocket and an extra slot.

Fits: Tesla Model 3/Y center console

MakerWorld

Tesla Model 3/Y 2021+ Center Console Tray Tray Tesla Model 3/Y 2021+ Center Console Tray

Slim sliding tray for the 2021+ Tesla Model 3/Y center console (with Qi charger); deep enough for large phones, with a cable-routing hole.

Fits: 2021+ Tesla Model 3/Y center console with Qi charger

MakerWorld

All in One Car Modular Headrest Cup Holder Modular All in One Car Modular Headrest Cup Holder

Modular headrest-mounted hanger with a cup-holder attachment for drive-thru drinks, mugs and thermal cups; the same handle also takes headphone, bag and phone accessories.

Fits: Headrest posts

MakerWorld

In-car Hook Automotive Rear Seat Hook Hook In-car Hook Automotive Rear Seat Hook

Headrest-post hook for hanging bags, jackets and groceries off the back seat; comes in large and small sizes for different vehicles.

Fits: Headrest posts — large and small sizes

by user_3129958783 · MakerWorld

Clip-On Car Holder – Polestar 2, 4 & Universal Holder Clip-On Car Holder – Polestar 2, 4 & Universal

Universal clip-on holder for side pockets and console trim — works as a bottle holder, slim-can holder or mini trash bin; also fits Tesla, Volvo, BMW, VW and Audi.

Fits: Side pockets and console trim — Polestar 2, 4 and most cars

by Lenteh · MakerWorld

Car Cup Phone Holder Holder Car Cup Phone Holder

Cup-holder insert with a rotating phone holder on top; when the phone is out, standard cups still fit inside. Scales 20% up or down. Companion to the Car Cup Holder Expander.

Fits: Standard car cup holders

MakerWorld

Can’t find your part?

Don’t see your vehicle here? No problem — tell us what you drive and what you need. We’ll research it, find the part or the file, and print it for you. Send a photo, the year and model, or your own STL file — we’ll design it, print it, and hold it for pickup at 1717 O St, deliver it in town, or mail it to you. We’re also working on the hard ones nobody makes anymore, like the wagon hatch clips for the 80s GM wagons and power mirror frames. Bigger custom projects — like full door panels with speaker pods — are possible too; just ask.

Cabin parts are printed in ASA or PETG, not PLA — they hold up in a hot car. Engine-bay parts get ASA or nylon. We don’t print brakes, steering, fuel-system, wheel, or structural parts.